Our technology

The Blocksford Brickopore sequencer is built with LEGO MINDSTORMS EV3, a robotics control kit for LEGO Technic elements.

We couldn’t do quite what we wanted with the standard Mindstorms software, so we’ve got our Mindstorms to run a version of the Linux operating system called ev3dev. This is done by inserting a micro SD card into the EV3 brick that contains the new operating system.

We then built two pieces of software: a server that runs on a laptop (currently only tested with MacOS) and a client that runs on the EV3 brick.

If you want to build your own Brickopore sequencer, follow the steps below.

The only thing we ask is that you credit us and that you let us know which events you use it at, so that we can keep track of impact!

STEP 1: Download the build instructions, buy the bits and build it!

  • You can download the sequencer build instructions from here.
  • You need to get hold of a Mindstorms EV3 kit.
  • Then you need to get hold of some additional pieces.

STEP 2: Download the Blocksford Brickopore software

STEP 3: Running the sequencer

  • Connect the connected computer via a USB cable to the EV3 control brick.
  • Start the server software on the connected laptop.
  • Open an ssh connection to the brick and start the client software.
  • Sequence!

More detailed instructions will follow. In the meantime, contact us if you need further assistance.